Our Product Finder tool allows you to find the perfect product for your requirements.
757 Nylon
Hexagon Head Stopper Plug, Globally Approved, Explosive Atmosphere Cable / Conduit Accessory
• Provides means of blanking unused cable entries
• Temporary or permanent
• General purpose / industrial version available
• Equipment interface ‘O’ ring seal available
• Nylon Ex e only version available (-20˚C to +60˚C)
•-60˚C to 200˚C (metallic versions)
• Globally marked, IECEx, ATEX, cCSAus & UL
| 描述 | Allen Key凹槽 | 金属 | 非金属 | |||
| Ex "d" | Ex "e" | 安全区 | Ex "e" | 安全区 | ||
| 747嵌入式非防堵塞型’A’ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| 747嵌入式非防堵塞型’B’ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| 757六角头 | ✗ | ✓ | ✓ | ✓ | ✓ | ✓ |
| 757六角头配’O’型圈 | ✗ | ✓ | ✓ | ✓ | ✓ | ✓ |
| 767圆头 | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| 767圆头配’O’型圈 | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| BS 6121:Part 1:1989, IEC 62444, EN 62444 | |
| IK10 to IEC 62262 (20 joules) Brass & Stainless Steel Only | |
| CML 18ATEX1320X | |
| II 2G Ex d IIC Gb, Ex e IIC Gb, II 1D Ex ta IIIC Da IM2 Ex d I Mb, Ex e I Mb (II 2G Ex e IIC Gb, II 1D Ex ta IIIC Da only on Nylon version) |
|
| EN 60079-0,1,7, 31 | |
| IECEx CML 18.0177X | |
| Ex d I Mb, Ex e I Mb; Ex d IIC Gb,Ex e IIC Gb, Ex ta IIIC Da | |
| IEC 60079-0,1, 7, 31 | |
| 1055233 | |
| Ex e II, Class I, Zone 1, AEx e II; IP66, 67, 68; Enclosure Type 4X; Class II Groups E, F and G; Class III | |
| C22.2 No. 0, 0.5, 30,94,CAN/CSA E60079-0, 1, 7, UL50 Edition 11, UL1203 Edition 4, UL 60079-0, 1, 7 |
|
| E214221 | |
| Class I, Groups A,B,C,D; Class II Groups E,F,G; Class III |
|
| UL 1203 | |
| TC RU C-GB.AA87.B.00487 | |
| 14-GA4BO-0255X | |
| P444949 | |
| GYJ13.1143X | |
| TÜV 12.1333X | |
| 03866 | |
| LRS: 01/00173, DNV: TAE00000Y, ABS: 17-LD1619350-PDA, BV: 43180/A1BV | |
| -60°C to +200°C (Metallic), -20°C to +60°C (Nylon) | |
| IP66 or IP68 when fitted with a CMP ‘O’ ring or Entry Thread Seal** | |
| Brass, Electroless Nickel Plated Brass, Aluminium, Stainless Steel, Nylon |
Note: * Mechanical & Electrical Classifications applied as per IEC 62444 & EN 62444
** When CMP installation accessories are used. Refer to Maintaining a Seal for further information.
*** IP68 tested to a minimum depth of 30 metres for 12 hours, alternate depths / durations can be provided upon request
| 订货编号 | 螺纹尺寸 | 最小螺纹长度 | 对边直径A | 对角直径 | 名义安装长度C |
| 757DM1 | M16 X 1.5 | 0.59 | 0.87 | 0.95 | 0.20 |
| 757DM2 | M20 X 1.5 | 0.59 | 0.94 | 1.04 | 0.20 |
| 757DM3 | M25 X 1.5 | 0.59 | 1.18 | 1.30 | 0.20 |
| 757DM4 | M32 X 1.5 | 0.59 | 1.42 | 1.56 | 0.20 |
| 757DM5 | M40 X 1.5 | 0.59 | 1.81 | 1.99 | 0.20 |
| 757DM6 | M50 X 1.5 | 0.59 | 2.17 | 2.38 | 0.20 |
| 757DM7 | M63 X 1.5 | 0.59 | 2.76 | 3.03 | 0.20 |
| 757DM8 | M75 X 1.5 | 0.59 | 3.15 | 3.46 | 0.20 |
| 757DM9 | M90 X 2.0 | 0.94 | 3.90 | 4.29 | 0.20 |
| 757DM10 | M100 x 2.0 | 0.94 | 4.25 | 4.68 | 0.20 |
| 如无特殊备注，所有尺寸单位均为毫米 | |||||
| 订货编号 | 螺纹尺寸 | 最小螺纹长度 | 对边直径A | 对角直径 | 名义安装长度C |
| 757DM1 | M16 X 1.5 | 15.0 | 22.0 | 24.2 | 5.0 |
| 757DM2 | M20 X 1.5 | 15.0 | 24.0 | 26.4 | 5.0 |
| 757DM3 | M25 X 1.5 | 15.0 | 30.0 | 33.0 | 5.0 |
| 757DM4 | M32 X 1.5 | 15.0 | 36.0 | 39.6 | 5.0 |
| 757DM5 | M40 X 1.5 | 15.0 | 46.0 | 50.6 | 5.0 |
| 757DM6 | M50 X 1.5 | 15.0 | 55.0 | 60.5 | 5.0 |
| 757DM7 | M63 X 1.5 | 15.0 | 70.0 | 77.0 | 5.0 |
| 757DM8 | M75 X 1.5 | 15.0 | 80.0 | 88.0 | 5.0 |
| 757DM9 | M90 X 2.0 | 24.0 | 99.0 | 108.9 | 5.0 |
| 757DM10 | M100 x 2.0 | 24.0 | 108.0 | 118.8 | 5.0 |
| 如无特殊备注，所有尺寸单位均为毫米 | |||||
