Product Finder
CN EN-UK EN-US

Product Finder

Our Product Finder tool allows you to find the perfect product for your requirements.

PX2K | Ex e, Ex d, Ex nR, Ex ta | Explosive Atmosphere Barrier Cable Gland For all types of Armoured cables

Globally Approved, Explosive Atmosphere Barrier Cable Gland

• Metal-to-metal armour clamping
• Direct & remote installation
• Compound barrier type flameproof seal
• Controlled outer ‘load retention’ seal
• Unique OSTG prevents overtightening
• Integral protected deluge seal
• -60˚C to +85˚C
• Class I Zone 1, 21 and Zone 2, 22 Class I Division 1 & 2 ABCD
• Globally marked, IECEx, ATEX, UL & cCSAus
• EMC tested

† Grooved Cone (X) is predominantly used for Wire Braid (e.g. GSWB, TCWB), Steel Tape Armour (STA, DSTA) and Aluminium Strip Armour (ASA) but is also suitable for Single Wire Armour (SWA), Aluminium Wire Armour (AWA) and Pliable Wire Armour (PWA) if the range is outside that of the Stepped Cone (W).

Note: Grooved Cone (X) dimensions shown in the Cable Gland Selection Table below are for a double wire strand of braid armour cables. Tapes can also be doubled over. For cables that have only a single layer of armour such as SWA the clamping range should be used as shown in the table below.

Stepped (W) Cone is suitable for Single Wire Armour (SWA), or Aluminium Wire Armour (AWA) cables.

For under / oversized armour wires click here

BS 6121:Part 1:1989, IEC 62444, EN 62444
Impact = Level 8, Retention = Class D
IK10 to IEC 62262 (20 joules) Brass & Stainless Steel only
Category B (Category A when used with braid, tape or pliable wire armour cables)
CML 18ATEX1325X, CML 18ATEX4317X
II 2G, II 1D, Ex d IIC Gb, Ex e IIC Gb, Ex ta IIIC Da
II 3G Ex nR IIC Gc, IM2 Ex d I Mb, Ex e I Mb
EN 60079-0,1,7,15,31
IECEx CML 18.0182X, IECEx SIM 14.0008X
Ex d IIC Gb, Ex e IIC Gb, Ex nR IIC Gc, Ex ta IIIC Da, Ex d I Mb, Ex e I Mb
IEC 60079-0,1,7,15,31
2288626
Class I, Div. 1, 2 Groups A, B, C and D; Class II, Div. 1, 2 Groups E, F and G; Class III, Div. 1, 2; Type 4X: Oil Resistant II:
Class I, Zone 1 AEx d IIC Gb, AEx e IIC Gb, Class I, Zone 2 AEx nR IIC Gc, Class I, Zone 20 AEx ta IIIC Da
Class I, Div. 1, 2 Groups A, B, C and D; Class II, Div. 1, 2 Groups E, F and G; Class III, Div. 1, 2; Type
4X: Oil Resistant II:
Ex d IIC Gb, Ex e IIC Gb, Ex nR IIC Gc, Ex ta IIIC Da
CAN/CSA-C22.2 No 0,18,25,30,94,174, CAN/CSA-E60079-0,1,7,15,31 CAN/CSA-E61241-1-1 Part
1-1, ANSI/UL 514B Ed 5, ANSI/UL 50 Ed 11, ANSI/UL 2225 Ed 4, UL60079
E201187, E161256C
Class I Div 1,2, Groups A,B,C,D, Class II Div 1,2, Groups E,F,G
UL 2225, CSA C22.2 No 174, UL 514B, CSA C22.2 No 18, CSA C22.2 No 30
UA.TR.047.C.0644-15
TC RU C-GB.AA87.B.00487
14-GA4BO-0252X
P444949
GYJ13.1140X, GYJ13.1282X
TÜV 12.2073X
03866
LRS: 01/00172, DNV: TAE00000Y, ABS: 14-LD234401A-4-PDA, BV: 43180/A1BV
IP66, IP67 & IP68
DTS01 : 91
Brass, Electroless Nickel Plated Brass, Stainless Steel, Aluminium
CMP SOLO LSF Halogen Free Thermoset Elastomer / Epoxy Barrier Compound
Single Wire Armour (SWA), Aluminium Wire Armour (AWA), Wire Braid Armour (e.g. SWB),
Screened Flexible (EMC) Wire Braid (e.g. CY / SY), Pliable Wire Armour (PWA), Steel Tape
Armour (STA), Strip Armour (e.g. ASA)***
Detachable Compound Tube / Cone & AnyWay Universal Clamping Ring
Unique CMP ‘LRS’ Outer Seal (Load Retention Seal)
Inner Compound Barrier & Outer Sheath
Locknuts, Earth Tags, Serrated Washers, Entry Thread Seals, Shrouds,Ingress Discs
Spanners, Armour Former Tool

Note : * Mechanical & Electrical Classifications applied as per IEC 62444 & EN 62444
** When CMP installation accessories are used. Refer to Maintaining a Seal for further information.
*** Where the cable is permitted by code (NEC and/or CEC)
**** IP68 tested to a minimum depth of 30 metres for 12 hours, alternate depths / durations can be provided upon request

Certificates

Click hereClick here to view Certificates

Product Selection Table

Click here to view Technical Illustration

Technical Illustration

Click here to view how to order

电缆接头规格进口螺纹 C(螺纹长度可调整)电缆芯数导线总直径'A'
A
电缆内护层直径G电缆


B
铠层厚度对边
直径
D
对角
直径
D
名义安装
长度F
组合订单参考号
(*黄铜,公制)
管套电缆
密封接头
重量
(Ozs)
标准可选开槽
锥体 (X)
阶形锥体(W)
公制螺纹长度(公制)ENPT螺纹长度
(NPT)E
NPT最大最小最大最小最大最小最大最大最大规格型号订货
后缀
20S16M200.59½0.78¾"210.460.460.240.520.010.040.030.051.201.322.4420S16PX2K1NAPVC068.47
20SM200.59½0.78¾"210.460.460.370.630.010.040.030.051.201.322.4420SPX2K1NAPVC068.11
20M200.59½0.78¾"210.500.510.490.820.020.040.030.051.201.322.4820PX2K1NAPVC068.47
25SM250.59¾0.801"300.690.700.550.870.020.050.050.061.481.632.7425SPX2K1NAPVC0913.05
25M250.59¾0.801"300.690.700.721.030.020.050.050.061.481.632.7425PX2K1NAPVC0913.05
32M320.5910.981 ¼"380.930.940.931.330.020.050.060.081.811.992.9532PX2K1NAPVC1120.11
40M400.591 ¼1.011 ½"591.181.191.101.590.020.060.060.082.172.382.9540PX2K1NAPVC1528.22
50SM500.591 ½1.032"891.441.451.391.840.020.060.080.102.362.603.0350SPX2K1NAPVC1831.75
50M500.5921.062 ½"1151.611.631.592.090.020.060.080.102.763.033.0350PX2K1NAPVC2141.98
63SM630.5921.062 ½"1151.891.911.802.340.020.060.080.102.953.253.1463SPX2K1NAPVC2349.03
63M630.592 ½1.573"1152.112.132.152.590.020.060.080.103.153.463.1663PX2K1NAPVC2549.74
75SM750.592 ½1.573"1402.362.372.322.830.020.060.080.103.543.903.4275SPX2K1NAPVC2873.72
75M750.5931.633 ½"1402.532.532.633.090.020.060.100.123.944.333.4875PX2K1NAPVC3089.60
90M900.943 ½1.694"1402.962.983.003.560.030.060.120.164.534.984.0290PX2K1NAPVC32130.87
100M1000.943 ½1.694"2003.373.383.393.990.030.060.120.165.005.504.49100PX2K1NALSF33152.03
显示的所有尺寸都按英寸计,除非另有规定。
电缆接头规格进口螺纹 C(螺纹长度可调整)电缆芯数导线总直径'A'
A
电缆内护层直径G电缆


B
铠层厚度对边
直径
D
对角
直径
D
名义安装
长度F
组合订单参考号
(*黄铜,公制)
管套电缆
密封接头
重量
(Kgs)
标准可选开槽
锥体 (X)
阶形锥体(W)
公制螺纹长度(公制)ENPT螺纹长度
(NPT)E
NPT最大最小最大最小最大最小最大最大最大规格型号订货
后缀
20S16M2015.0½19.9¾"2111.711.76.113.10.31.00.81.2530.533.662.020S16PX2K1NAPVC060.24
20SM2015.0½19.9¾"2111.711.79.515.90.31.00.81.2530.533.662.020SPX2K1NAPVC060.23
20M2015.0½19.9¾"2112.612.912.520.90.41.00.81.2530.533.663.020PX2K1NAPVC060.24
25SM2515.0¾20.21"3017.517.914.022.00.41.21.251.637.541.369.525SPX2K1NAPVC090.37
25M2515.0¾20.21"3017.517.918.226.20.41.21.251.637.541.369.525PX2K1NAPVC090.37
32M3215.0125.01 ¼"3823.623.923.733.90.41.21.62.046.050.675.032PX2K1NAPVC110.57
40M4015.01 ¼25.61 ½"5930.030.327.940.40.41.61.62.055.060.575.040PX2K1NAPVC150.80
50SM5015.01 ½26.12"8936.636.935.246.70.41.62.02.560.066.077.050SPX2K1NAPVC180.90
50M5015.0226.92 ½"11541.041.340.453.00.61.62.02.570.077.077.050PX2K1NAPVC211.19
63SM6315.0226.92 ½"11547.948.445.659.40.61.62.02.575.082.579.763SPX2K1NAPVC231.39
63M6315.02 ½39.93"11553.754.054.665.80.61.62.02.580.088.080.363PX2K1NAPVC251.41
75SM7515.02 ½39.93"14059.960.259.072.00.61.62.02.590.099.086.875SPX2K1NAPVC282.09
75M7515.0341.53 ½"14064.264.266.778.40.61.62.53.0100.0110.088.375PX2K1NAPVC302.54
90M9020.03 ½42.84"14075.375.676.290.30.81.63.154.0115.0126.5102.190PX2K1NAPVC323.71
100M10020.03 ½42.84"20085.685.986.1101.40.81.63.154.0127.0139.7114.0100PX2K1NALSF334.31
如无特殊备注,所有尺寸单位均为毫米