Product Finder
CN EN-UK EN-US

Product Finder

Our Product Finder tool allows you to find the perfect product for your requirements.

E1FU | Ex e, Ex d, Ex nR, Ex ta | Explosive Atmosphere Cable Gland For all types of Armoured cables

Globally Approved, Explosive Atmosphere Cable Gland

• Metal-to-metal armour clamping
• Direct & remote installation
• Displacement type flameproof inner seal
• Controlled outer ‘load retention’ seal
• Unique OSTG prevents overtightening
• Designed to prevent Coldflow
• -60˚C to +130˚C
• Class I Zone 1, 21 and Zone 2, 22 Class I Division 2 ABCD
• Globally marked, IECEx, ATEX & cCSAus
• EMC tested

Note: † Grooved Cone (X) is predominantly used for Wire Braid (e.g. GSWB, TCWB), Steel Tape Armour (STA, DSTA) and Aluminium Strip Armour (ASA) but is also suitable for Single Wire Armour (SWA), Aluminium Wire Armour (AWA) and Pliable Wire Armour (PWA) if the range is outside that of the Stepped Cone (W).

Note: Grooved Cone (X) dimensions shown in the Cable Gland Selection Table below are for a double wire strand of braid armour cables. Tapes can also be doubled over. For cables that have only a
single layer of armour such as SWA the clamping range should be used as shown in the table below.

Stepped (W) Cone is suitable for Single Wire Armour (SWA), or Aluminium Wire Armour (AWA) cables.

For under / oversized armour wires click here

BS 6121:Part 1:1989, IEC 62444, EN 62444
Impact = Level 8, Retention = Class D
IK10 to IEC 62262 (20 joules) Brass & Stainless Steel only
Category B (Category A when used with braid, tape or pliable wire armour cables)
CML 18ATEX1324X, CML 18ATEX4316X
II 2G, II 1D, Ex d IIC Gb, Ex e IIC Gb, Ex ta IIIC Da
II 3G Ex nR IIC Gc, IM2 Ex d I Mb, Ex e I Mb
EN 60079-0,1,7,15,31
IECEx CML 18.0181X, IECEx SIM 14.0007X
Ex d IIC Gb, Ex e IIC Gb, Ex nR IIC Gc, Ex ta IIIC Da, Ex d I Mb, Ex e I Mb
IEC 60079-0,1,7,15,31
1310517
Ex d IIC; Ex e II; Ex nR II; Class I, Div 2, Groups A,B,C,D, Class II, Div 2 Groups E,F,G, Class III;
Encl Type T4X Class I, Zone 1, AEx e II / AEx nR II
CAN/CSA-C22.2 No 0,18,25,30,174,94, CAN/CSA-E60079-0,1,7,15
ANSI/UL 514B Ed 5, ANSI/UL 50 Ed 11, ANSI/UL 2225 Ed 4, UL60079-0,1,7,15
TC RU C-GB.AA87.B.00487
14-GA4BO-0257X
GYJ13.1140X , GYJ13.1282X
P444949
TÜV 12.0618X
03866
LRS: 01/00173, DNV: TAE00000Y, ABS: 14-LD234401A-4-PDA, BV: 43180/A1BV
IP66 as standard (IP67, IP68 available upon request)
DTS01:91 option available on request (white ferrule for identification purposes)
Brass, Electroless Nickel Plated Brass, Aluminium
CMP SOLO LSF Halogen Free Thermoset Elastomer
Single Wire Armour (SWA), Aluminium Wire Armour (AWA), Steel Tape Armour (STA), Wire
Braid Armour (e.g. SWB), Aluminium Strip Armour (ASA), Pliable Wire Armour (PWA),
Screened Flexible (EMC) Wire Braid (e.g. CY / SY), Armoured & Jacketed
Reversible Armour Cone & AnyWay Universal Clamping Ring
CMP Inner Displacement Seal & Unique CMP ‘LRS’ ™ Outer Load Retention Seal
Cable Inner Bedding & Outer Cable Sheath
Locknuts, Earth Tags, Serrated Washers, Entry Thread Seals, Shrouds,Ingress Discs
Spanners, Armour Former Tool

Note : * Mechanical & Electrical Classifications applied as per IEC 62444 & EN 62444
** When CMP installation accessories are used. Refer to Maintaining a Seal for further information.
*** IP68 tested to a minimum depth of 30 metres for 12 hours, alternate depths / durations can be provided upon request

Certificates

Click hereClick here to view Certificates

Product Selection Table

Click here to view Technical Illustration

Technical Illustration

Click here to view how to order

电缆接头规格进口螺纹 C(螺纹长度可调整)电缆
内护层
直径
A
电缆


B
铠层厚度对边
直径
D
对角
直径
D
名义安装
长度F
组合订单参考号
(*黄铜,公制)
管套电缆
密封接头
重量
(Ozs)
标准可选开槽
锥体 (X)
阶形锥体(W)
公制螺纹长度(公制)ENPT螺纹长度
(NPT)E
NPT最小最大最小最大最小最大最小最大最大最大规格型号订货
后缀
20S16M200.59½0.78¾"0.120.340.240.520.010.040.030.050.941.042.8520S16E1FU1NAPVC045.64
20SM200.59½0.78¾"0.240.460.370.630.010.040.030.050.941.042.7620SE1FU1NAPVC045.29
20M200.59½0.78¾"0.260.550.490.820.020.040.030.051.201.322.8720E1FU1NAPVC067.41
25SM250.59¾0.801"0.440.780.550.870.020.050.050.061.481.633.5025SE1FU1NAPVC0911.64
25M250.59¾0.801"0.440.780.721.030.020.050.050.061.481.633.5025E1FU1NAPVC0911.64
32M320.5910.981 ¼"0.671.030.931.330.020.050.060.081.811.993.3932E1FU1NAPVC1115.17
40M400.591 ¼1.011 ½"0.871.261.101.590.020.060.060.082.172.383.5440E1FU1NAPVC1521.87
50SM500.591 ½1.032"1.161.501.391.840.020.060.080.102.362.603.5850SE1FU1NAPVC1826.46
50M500.5921.062 ½"1.401.731.592.090.020.060.080.102.763.043.7450E1FU1NAPVC2133.51
63SM630.5921.062 ½"1.581.961.802.340.020.060.080.102.953.254.0263SE1FU1NAPVC2347.27
63M630.592 ½1.573"1.862.202.152.590.020.060.080.103.153.464.0963E1FU1NAPVC2547.27
75SM750.592 ½1.573"2.082.442.322.830.020.060.080.103.543.904.5375SE1FU1NAPVC2874.43
75M750.5931.633 ½"2.332.672.633.090.020.060.100.123.944.334.6175E1FU1NAPVC3085.36
90M900.943 ½1.694"2.623.093.003.560.030.060.120.164.504.945.7990E1FU1NAPVC32148.50
100M1000.943 ½1.694"2.993.583.393.990.030.060.120.164.845.335.51100E1FU1NALSF33156.97
115M1150.944"1.735"3.393.854.004.340.030.060.120.165.255.786.38115E1FU1NALSF34218.35
130M1300.945"1.84-3.824.524.344.850.030.060.120.166.006.606.85130E1FU1NALSF35294.19
显示的所有尺寸都按英寸计,除非另有规定。
电缆接头规格进口螺纹 C(螺纹长度可调整)电缆
内护层
直径
A
电缆


B
铠层厚度对边
直径
D
对角
直径
D
名义安装
长度F
组合订单参考号
(*黄铜,公制)
管套电缆
密封接头
重量
(Kgs)
标准可选开槽
锥体 (X)
阶形锥体(W)
公制螺纹长度(公制)ENPT螺纹长度
(NPT)E
NPT最小最大最小最大最小最大最小最大最大最大规格型号订货
后缀
20S16M2015.0½19.9¾"3.18.66.113.10.31.00.81.2524.026.472.520S16E1FU1NAPVC040.16
20SM2015.0½19.9¾"6.111.69.515.90.31.00.81.2524.026.470.020SE1FU1NAPVC040.15
20M2015.0½19.9¾"6.513.912.520.90.41.00.81.2530.533.673.020E1FU1NAPVC060.21
25SM2515.0¾20.21"11.119.914.022.00.41.21.251.637.541.389.025SE1FU1NAPVC090.33
25M2515.0¾20.21"11.119.918.226.20.41.21.251.637.541.389.025E1FU1NAPVC090.33
32M3215.0125.01 ¼"17.026.223.733.90.41.21.62.046.050.686.032E1FU1NAPVC110.43
40M4015.01 ¼25.61 ½"22.032.127.940.40.41.61.62.055.060.590.040E1FU1NAPVC150.62
50SM5015.01 ½26.12"29.538.135.246.70.41.62.02.560.066.091.050SE1FU1NAPVC180.75
50M5015.0226.92 ½"35.644.040.453.00.61.62.02.570.177.195.050E1FU1NAPVC210.95
63SM6315.0226.92 ½"40.149.945.659.40.61.62.02.575.082.5102.063SE1FU1NAPVC231.34
63M6315.02 ½39.93"47.255.954.665.80.61.62.02.580.088.0104.063E1FU1NAPVC251.34
75SM7515.02 ½39.93"52.861.959.072.00.61.62.02.590.099.0115.075SE1FU1NAPVC282.11
75M7515.0341.53 ½"59.167.966.778.40.61.62.53.0100.0110.0117.075E1FU1NAPVC302.42
90M9024.03 ½42.84"66.678.676.290.30.81.63.154.0114.3125.4147.090E1FU1NAPVC324.21
100M10024.03 ½42.84"76.090.986.1101.40.81.63.154.0123.0135.3140.0100E1FU1NALSF334.45
115M11524.04"44.05"86.097.9101.5110.20.81.63.154.0133.4146.7162.0115E1FU1NALSF346.19
130M13024.05"46.8-97.0114.9110.2123.20.81.63.154.0152.4167.6174.0130E1FU1NALSF358.34
如无特殊备注,所有尺寸单位均为毫米