Product Finder
CN EN-UK EN-US

Product Finder

Our Product Finder tool allows you to find the perfect product for your requirements.

PX2KXREX | Ex e, Ex d, Ex nR, Ex ta | Explosive Atmosphere Barrier Cable Gland For all types of Braid & Tape Armoured Cables

Globally Approved, Explosive Atmosphere RapidEx Barrier Cable Gland

• RapidEx liquid pour sealing system
– Enhances reliability, reduces risk
– Reduces man hours
– Reduces cost
• Metal-to-metal armour clamping
• Direct & remote installation
• Integral protected deluge seal
• Controlled outer ‘load retention’ seal
• Unique OSTG prevents overtightening
• Class I Zone 1, 21 and Zone 2, 22 Class I Division 1 & 2 ABCD
• -60˚C to +85˚C
• Globally marked, IECEx, ATEX & cCSAus
• EMC tested

BS 6121:Part 1:1989, IEC 62444, EN 62444
Impact = Level 8, Retention = Class D
IK10 to IEC 62262 (20 joules) Brass & Stainless Steel only
Category B (Category A when used with braid, tape or pliable wire armour cables)
CML 18ATEX1325X, CML 18ATEX4317X
II 2G, II 1D, Ex d IIC, Ex e IIC Gb, Ex ta IIIC Da
II 3G Ex nR IIC Gc, IM2 Ex d I Mb, Ex e I Mb
EN 60079-0,1,7,15,31
IECEx CML 18.0182X, IECEx SIM 14.0008X
Ex d IIC Gb, Ex e IIC Gb, Ex nR IIC Gc, Ex ta IIIC Da, Ex d I Mb, Ex e I Mb
IEC 60079-0,1,7,15,31
2288626
Class I, Div. 1, 2 Groups A, B, C and D; Class II, Div. 1, 2 Groups E, F and G; Class III, Div. 1, 2;
Type 4X: Oil Resistant II:
Class I, Zone 1 AEx d IIC Gb, AEx e IIC Gb, Class I, Zone 2 AEx nR IIC Gc,
Class I, Zone 20 AEx ta IIIC Da
Class I, Div. 1, 2 Groups A, B, C and D; Class II, Div. 1, 2
Groups E, F and G; Class III, Div. 1, 2; Type 4X: Oil Resistant II:
Ex d IIC Gb, Ex e IIC Gb, Ex nR IIC Gc, Ex ta IIIC Da
CAN/CSA-C22.2 No 0,18,25,30,94,174, CAN/CSA-E60079-0,1,7,31 CAN/CSA-E61241-1-1 Part 1-1, ANSI/UL 514B Ed 5, ANSI/UL 50 Ed 11, ANSI/UL 2225 Ed 4, UL60079
TC RU C-GB.AA87.B.00487
UA.TR.047.C.0644-15
P444949
GYJ13.1140X, GYJ13.1282X
TÜV 12.2073X
03866
LRS: 01/00172, DNV: TAE00000Y, ABS: 14-LD234401A-4-PDA, BV: 43180/A1BV
IP66, IP67 & IP68
DTS01 : 91
Brass, Electroless Nickel Plated Brass, Stainless Steel, Aluminium
CMP SOLO LSF Halogen Free Thermoset Elastomer / RapidEx Resin Barrier
Screened Flexible (EMC) Wire Braid (e.g. CY / SY), Pliable Wire Armour (PWA), Steel
Tape Armour (STA), Wire Braid Armour (e.g. SWB), Aluminium Strip Armour (ASA),
Armoured & Jacketed
Detachable Resin Tube / Cone & AnyWay Universal Clamping Ring
Unique CMP ‘LRS’ Outer Seal (Load Retention Seal)
Inner RapidEx Barrier Seal & Outer Sheath
Locknuts, Earth Tags, Serrated Washers, Entry Thread Seals, Shrouds,Ingress Discs
Spanners

Note: * Mechanical & Electrical Classifications applied as per IEC 62444 & EN 62444
** When CMP installation accessories are used. Refer to Maintaining a Seal for further information.
***Where the cable is permitted by code (NEC and/or CEC)
**** IP68 tested to a minimum depth of 30 metres for 12 hours, alternate depths / durations can be provided upon request

Certificates

Click hereClick here to view Certificates

Product Selection Table

Click here to view Technical Illustration

Technical Illustration

Click here to view how to order

电缆接头规格进口螺纹 C(螺纹长度可调整)电缆芯数导线总直径'A'
A
电缆内护层直径G电缆


B
铠层厚度
对边
直径
D
对角
直径
D
名义安装
长度F
组合订单参考号
(*黄铜,公制)
管套电缆
密封接头
重量
(Ozs)
标准可选开槽锥体(X)
公制螺纹长度(公制)ENPT螺纹长度
(NPT)E
NPT最大最大最大最小最大最小最大最大最大规格型号订货
后缀
20S16M200.59½0.78¾"210.460.460.240.520.010.041.201.322.4420S16PX2KXREX1NAPVC068.47
20SM200.59½0.78¾"210.460.460.370.630.010.041.201.322.4420SPX2KXREX1NAPVC068.11
20M200.59½0.78¾"210.500.510.490.820.020.041.201.322.4820PX2KXREX1NAPVC068.47
25SM250.59¾0.801"300.690.700.550.870.020.051.481.632.7425SPX2KXREX1NAPVC0913.05
25M250.59¾0.801"300.690.700.721.030.020.051.481.632.7425PX2KXREX1NAPVC0913.05
32M320.5910.981 ¼"500.930.940.931.330.020.051.811.992.9532PX2KXREX1NAPVC1120.11
40M400.591 ¼1.011 ½"591.181.191.101.590.020.062.172.382.9540PX2KXREX1NAPVC1528.22
50SM500.591 ½1.032"891.441.451.391.840.020.062.362.603.0350SPX2KXREX1NAPVC1831.75
50M500.5921.062 ½"1151.611.631.592.090.020.062.763.033.0350PX2KXREX1NAPVC2141.98
63SM630.5921.062 ½"1151.891.911.802.340.020.062.953.253.1463SPX2KXREX1NAPVC2349.03
63M630.592 ½1.573"1152.112.132.152.590.020.063.153.463.1663PX2KXREX1NAPVC2549.74
75SM750.592 ½1.573"1402.362.372.322.830.020.063.543.903.4275SPX2KXREX1NAPVC2873.72
75M750.5931.633 ½"1402.532.532.633.090.020.063.944.333.4875PX2KXREX1NAPVC3089.60
90M900.943 ½1.694"1402.962.983.003.560.030.064.534.984.0290PX2KXREX1NAPVC32130.87
100M1000.943 ½1.694"2003.373.383.393.990.030.065.005.504.49100PX2KXREX1NALSF33169.67
所有尺寸都按英寸计,除非另有规定。
电缆接头规格进口螺纹 C(螺纹长度可调整)电缆芯数导线总直径'A'
A
电缆内护层直径G电缆


B
铠层厚度
对边
直径
D
对角
直径
D
名义安装
长度F
组合订单参考号
(*黄铜,公制)
管套电缆
密封接头
重量
(Kgs)
标准可选开槽锥体(X)
公制螺纹长度(公制)ENPT螺纹长度
(NPT)E
NPT最大最大最大最小最大最小最大最大最大规格型号订货
后缀
20S16M2015.0½19.9¾"2111.711.76.113.10.31.030.533.662.020S16PX2KXREX1NAPVC060.24
20SM2015.0½19.9¾"2111.711.79.515.90.31.030.533.662.020SPX2KXREX1NAPVC060.23
20M2015.0½19.9¾"2112.612.912.520.90.41.030.533.663.020PX2KXREX1NAPVC060.24
25SM2515.0¾20.21"3017.517.914.022.00.41.237.541.369.525SPX2KXREX1NAPVC090.37
25M2515.0¾20.21"3017.517.918.226.20.41.237.541.369.525PX2KXREX1NAPVC090.37
32M3215.0125.01 ¼"5023.623.923.733.90.41.246.050.675.032PX2KXREX1NAPVC110.57
40M4015.01 ¼25.61 ½"5930.030.327.940.40.41.655.060.575.040PX2KXREX1NAPVC150.80
50SM5015.01 ½26.12"8936.636.935.246.70.41.660.066.077.050SPX2KXREX1NAPVC180.90
50M5015.0226.92 ½"11541.041.340.453.00.61.670.077.077.050PX2KXREX1NAPVC211.19
63SM6315.0226.92 ½"11547.948.445.659.40.61.675.082.579.763SPX2KXREX1NAPVC231.39
63M6315.02 ½39.93"11553.754.054.665.80.61.680.088.080.363PX2KXREX1NAPVC251.41
75SM7515.02 ½39.93"14059.960.259.072.00.61.690.099.086.875SPX2KXREX1NAPVC282.09
75M7515.0341.53 ½"14064.264.266.778.40.61.6100.0110.088.375PX2KXREX1NAPVC302.54
90M9020.03 ½42.84"14075.375.676.290.30.81.6115.0126.5102.190PX2KXREX1NAPVC323.71
100M10020.03 ½42.84"20085.685.986.1101.40.81.6127.0139.7114.0100PX2KXREX1NALSF334.81
如无特殊备注,所有尺寸单位均为毫米